CA26: Ford Sync 4 Camera Hardwire cable

We recommend checking out our Genogram at the bottom of the description tab to help answer some basic questions. It will guide you to the right kit for your vehicle based on your needs.

We’ve created different kits to match various Next Gen Ranger models and existing equipment you may already have. For example, if you already have a caravan camera, you won’t need a full caravan camera kit—just the parts for integration.

Ford’s 24.5 touring pack includes pre-installed wiring under the glove box. If your vehicle has 360° cameras, it likely includes this wiring and a pre-installed trailer camera icon in the software.

For other Next Gen Rangers with Sync 4, there is a plug behind the cluster panel for connecting a trailer camera. If you require this plug, Ford will need to activate the trailer camera function in the head unit.

Yes you can check your vehicle for the wires as they are located underneath your glove box (pictures below):

In their recently revised Body Building manual, all the information is located on page 114-116: 

‘Reprogramming of the APIM and the IPMA using the FDRS will be required to allow the IPMA to display the auxiliary rear view camera whilst the vehicle is moving. See your local Ford Dealer or National Sales agent for further information on the APIM reprogramming’

‘Only vehicles with Digital Rear Vision and/or 360 deg Cameras (J3KAH or J3KAR) have the IPMA capability to support aftermarket fitment of an Auxiliary camera (NTSC format)’

Our workshop tests show that only CVBS NTSC cameras are compatible with the Ford Factory screen.

Yes, it can. Check our Genogram at the bottom of the description tab to find the kit that’s right for you.

Take a photo of your caravan camera and the plug on your A-frame or drawbar. Text it to us at 0483 930 453, and we’ll assess it and give you advice on compatibility.

Yes, it is possible to integrate a dual caravan camera into the Next Gen Ranger (including models with the 24.5 Touring Pack). However, there are a few challenges. To switch between the two camera views, you would need a dash panel switch to convert the video signal into two separate video signals. Unfortunately, the Ranger / Everest models do not have any spare dash panel spaces available, so you would need to install an aftermarket switch panel to suit your model.

If you are happy with this, then there will be 2 steps in order to view your dual camera: You would have to press the trailer camera icon on the screen and then activate the dash panel switch to view the other lens of the dual camera.

Please contact us to obtain a price as it will be an extra cost to modify and order in a switch.