Description
Please note before purchase: You may only be able to access your trailer camera when traveling under 8km/h. Some Ford dealerships may be able to enable a setting that allows viewing the trailer camera above 8km/h, though this option may not be available at all locations.
Utilise Your Safety Dave Caravan Camera with Your Factory Screen
If you want to integrate your existing Safety Dave caravan camera with your factory screen, we’ve got you covered! This kit includes the hardwire cable as standard, but you may need additional items depending on what’s already installed on your caravan.
Step 1: Check Your Camera Type
- AHD or CVBS Format?
- AHD Camera (January 2023 or later): You’ll need an AHD to CVBS converter ($120).
- CVBS Camera (Before January 2023): No converter is needed.
Step 2: Do You Already Have a Car Kit?
- If you already have a Safety Dave monitor or car kit, you only need the Male Safety Dave to Polaris Adaptor ($15) to connect to our integration module.
Step 3: Check Your Drawbar Plug
Look at the plug on your caravan’s drawbar to determine what else you need:
- Chrome 5-Pin Socket: (See Figure A):
- Purchase the following items from Safety Dave:
- Add the Male Safety Dave to Polaris Adaptor ($15) to connect everything to our module.
- 4-Pin Aviation Plug (See Figure B):
You have two options:- Option 1: Use a standard setup:
- Add a 7-metre extension cable ($20) and the Male Safety Dave to Polaris Adaptor ($15).
- Option 2: Use a WOZA kit for a curly cord setup:
- Add the WOZA Kit with Safety Dave Adaptor ($145) and a 7-metre extension cable ($15).
- Option 1: Use a standard setup:
Figure A
Please also see FAQ tab to see if this kit is right for you
Ford Sync IV AUX Camera Cluster Plug Instructions